The U.S. Consumer Product Safety Commission (CPSC) has issued
recall notices for the following scuba equipment. Please check your
gear bag to make certain you aren’t using any recalled equipment.
Contact the manufacturer for further information. Scuba STAR Network will update this list as new recall information is made available from the CPSC.
Scroll down to view the recalls...
WARNING: Not all defective scuba equipment is made the subject of a CPSC recall. Please check the "Notices" section of this site for additional information regarding scuba equipment safety notices.
Subject: BCDs Recalled by Halcyon Manufacturing Due to Drowning Hazard
October 1, 2009, Release # 10-002
Units: About 20,300
Manufacturer: Halcyon Manufacturing Inc., of High Springs, Fla.
Hazard: The over pressure valves (OPVs) in the diving equipment could fail allowing the buoyancy compensator devices (BCDs) and the diver lift inflatable devices to leak, posing a drowning hazard to divers.
Incidents/Injuries: None reported.
Description: This recall involves Halcyon diving equipment including the Halcyon Explorer, Eclipse, CCR35, Evolve and Pioneer Buoyancy Compensator Devices (BCDs) and Halcyon Surface Marker Buoys (SMBs), Lift Bags, Diver Alert Markers (DAMs) Surf Shuttle and Diver Lift Raft Inflatable Devices. “Halcyon” is printed on the diving equipment.
Sold at:Diving equipment retailers and distributors from January 2006 through December 2008 for between $350 and $450 for the buoyancy compensator devices (BCDs) and between $50 and $275 for the inflatable devices.
Manufactured in: United States
Remedy: Consumers should immediately stop using recalled diving equipment and return it to an authorized Halcyon distributor or dealer for a free inspection and, if necessary, free replacement of the overpressure valve spring.
Consumer Contact: : For more information, contact Halcyon at (800) 425-2966 between 8 a.m. and 5 p.m. ET Monday through Friday, visit the firm's Web site at www.halcyon.net/opv-recall, or email the firm at techservices@halcyon.net
Subject: Brownie's Third Lung Recalls Air Compressors Due to Drowning Hazard
November 19, 2008, Release #09-049
Name of Product: Air Compressors
Units: About 1,000
Manufacturer: Brownie's Third Lung, of Fort Lauderdale, Fla.
Hazard: The air compressor's components can fail, which could cause a stoppage of air flow. This poses a risk of drowning to users.
Incidents/Injuries: None reported.
Description: The recalled air compressors are used to provide air to divers. The recalled products include the following models:
Product Models Serial Numbers Gas-powered direct drive hookah compressor assemblies F280X, F390X, C270, C390, CTD390 14421 - 15715 Dual-head electric direct drive compressor assemblies E250, EC2 14344 - 15762
The serial number is printed on a metallic plate located on the compressor's base and on the storage case.
Sold at: Brownie's Third Lung factory and various marine/diving products resellers nationwide from July 2007 through August 2008 for between $2000 and $3500.
Manufactured in: United States
Remedy: Consumers should immediately stop using the air compressor and contact their dealer for a free inspection and repair, if necessary. Consumers are being directly notified of this recall.
Consumer Contact: For additional information, contact Brownie's Third Lung at (800) 327-0412 between 9 a.m. and 5 p.m. ET Monday through Friday, or visit the firm's Web site at www.browniedive.com
Subject: Aqua Lung America Recalls Apeks Scuba Diving Regulators Due to Drowning Hazard
Date: September17, 2008, Release #08-402
Name of Product: Apeks Second Stage Scuba Regulators
Units: About 25,000
Distributor: Aqua Lung America of Vista, Calif.
Manufacturer: Apeks Marine Equipment Ltd., of Blackburn, England
Hazard: These regulators can be missing the diaphragm cover which can causethe diaphragm to become displaced during a dive, allowing water to enter thescuba regulator. This poses a drowning hazard to divers.
Incidents/Injuries: None.
Description: This recall involves Apeks TX, ATX, and XTX second stageregulators that have never been serviced. Apeks and TX, ATX, or XTX is printedon the regulator.
Sold at: Authorized Apeks dealers nationwide from February 2000 throughJune 2008 for between $420 and $1,450.
Manufactured in: England
Remedy: Consumers should immediately stop diving with these regulators andvisit an authorized Apeks dealer for a free inspection and free installation ofa diaphragm cover, if the cover is missing.
Consumer Contact: For additional information, contact Aqua Lung toll-freeat (877) 253-3483 between 8 a.m.and 5 p.m. PT Monday through Friday, or visit the company's Web site at www.aqualung.com
Subject: Oceanic and AERIS First Stage Regulators Recalled
Date: December 11, 2007, Release #08-127
Name of Product: Oceanic and AERIS First Stage Regulators Due to Drowning Hazard
Units: About 6,000
Manufacturer: ROMI Enterprises, of San Leandro, Calif.
Hazard: An internal component that seals air between the high pressure first-stage and the intermediate pressure second-stage can fail. This can result in uncontrolled flow of air to the diver and pose a risk of serious injury or death.
Incidents/Injuries: ROMI has received two reports of units malfunctioning during diving and six reports of units malfunctioning while being tested by dealers prior to delivery to consumers. No injuries reported.
Description and Models: The recall involves the following regulator first stages:
Oceanic Regulator First Stages:
Model CDX5 Certain serial numbers from 30202856 through 51312641 and purchased from May 2006 through October 2007
Model FDX10 Certain serial numbers from 51408026 through 51411813 and purchased from May 2006 through October 2007
Models CDX, DXi, DX3, DX4, and TDX5 All serial numbers and serviced from May 2006 through October 2007
AERIS Regulator First Stages:
Model AT400 Certain serial numbers from 30200036 through 51311560 and purchased from May 2006 through October 2007
Balanced Diaphragm All serial numbers and serviced from May 2006 through October 2007
The model and serial numbers are stamped on the side of the body or on the body's rubber covering.
Sold at: The items were either sold or repaired at authorized Oceanic and AERIS retailers nationwide from May 2006 through October 2007. The items sold for between $300 and $500.
Manufactured in: United States and Taiwan
Remedy: Consumers should immediately stop using the recalled regulator first stages and take them to any authorized Oceanic or AERIS dealer for a free replacement part.
Consumer Contact: For further information or to determine if your specific unit is affected, contact ROMI toll-free at (888) 636-9390 between 8 a.m. and 5 p.m. PT Monday through Friday. Oceanic customers can send an e-mail to service@oceanicusa.com or visit the firm's Web site at www.oceanicworldwide.com. AERIS customers can send an e-mail to info@diveaeris.com or visit the firm's Web site at www.diveaeris.com
Subject: Swivels for Scuba Diving Masks Due to Drowning Hazard
Date: August 29, 2007, Release #07-293
Name of Product: AGA Swivels for Scuba Diving Masks
Units: About 1,500
Manufacturer: M&J Engineering, of Poway, Calif.
Hazard: The swivel, which is attached to a diving mask, could separate while diving. This will result in a sudden loss of the diver's air supply, causing the diver to engage in emergency ascent. This poses a risk of decompression sickness due to rapid ascent or drowning.
Incidents/Injuries: M&J Engineering has received one report of swivels separating from the masks while diving. No injuries have been reported.
Description: This recall involves all SW-3000 2nd stage 360-degree swivels for scuba diving masks manufactured between January 2004 and February 2005. The swivel has the date stamped on its body, below the patent number. Swivels that are already repaired have an arrow stamped on the top right corner of the swivel body.
Sold at: Diving retail stores nationwide between January 2004 and February 2005 for about $60.
Manufactured in: USA
Remedy: Consumers should immediately stop using the scuba diving masks with the swivel attached and contact M&J Engineering to receive a free repair.
Firm's Recall Hotline: (888) 794-8351
Subject: Innovative Scuba Concepts Recalls Diving Regulator Components Due to Drowning Hazard
Date: May 31, 2007, Release #07-200
Name of product: Swivel for a Scuba Regulator
Units: About 170
Importer: Innovative Scuba Concepts Inc., of Colorado Springs, Colo.
Hazard: The swivel, which is attached to a diving regulator, could separate while diving. This will result in a complete and sudden loss of the diver's air supply, causing the diver to engage in emergency ascent procedures. This poses a risk of decompression sickness due to rapid ascent, and air embolism or drowning if the diver panics or the emergency ascent procedure fails. Consumers should stop using recalled products immediately unless otherwise instructed.
Incidents/Injuries: The firm has received one report where the swivel separated during a dive and caused the diver to ascend using the buddy breathing technique. No injury was reported.
Description: The recall involves the HO110 Swivels sold as an aftermarket regulator component. There are no markings such as a date or production code embossed on the unit. Contact Innovative Scuba Concepts for information on where the recalled units were sold.
Sold at: Specialty retail dive stores nationwide from January 2006 through March 2007 for about $40. They also could have been installed by a dive shop regulator technician.
Manufactured in: Taiwan
Remedy: Consumers should stop using regulators with the swivel attached and contact the dive store where purchased for a refund.
Consumer Contact: For additional information, contact Innovative Scuba Concepts Inc. at (800) 472-2740 between 9 a.m. and 5 p.m. CT Monday through Friday, or visit the firm's Web site at www.innovativescuba.com
Subject: Pelagic Recalls Digital Dive Computers Due to Decompression Hazard
Date: February 28, 2007; Release #07-117
Name of product: Oceanic and AERIS Digital Dive Computers
Units: About 2,800
Manufacturer: Pelagic Pressure Systems, of San Leandro, Calif.
Hazard: When performing a switch from one gas to another during a dive, the dive computer's display will lock up and not return to the main dive screen that displays dive times. This can cause divers to enter decompression unknowingly or the diver could ascend prematurely, resulting in decompression sickness.
Incidents/Injuries: Pelagic has received a report of two dive computers malfunctioning. No injuries have been reported.
Description and Models: The recall involves Oceanic-brand ATOM 2.0 dive computers with serial numbers 1 through 2,079 (Revisions 2E, 3A, and 3B) and AERIS-brand EPIC dive computers with serial numbers 1 through 712 (Revision 1A), which can be accessed and viewed on the computer's display. Also, the serial number and date of manufacture are printed on the bottom of the unit (Oceanic ATOM 2.0 from August 23 to November 23, 2006, and AERIS EPIC from October 18 to November 14, 2006). This recall does not include any other Oceanic or AERIS brand dive computers.
Sold at: Authorized Oceanic dealers sold ATOM 2.0 dive computers nationwide from August 2006 through February 2007. Authorized AERIS dealers sold EPIC dive computers nationwide from October 2006 through February 2007. Both computers sold for between $670 and $950.
Manufactured in: United States
Remedy: Consumers should stop using the recalled dive computers and take them to an authorized Oceanic or AERIS dealer to get a free software upgrade.
Consumer Contact: Contact Pelagic toll-free at (888) 854-4960 between 8 a.m. and 5 p.m. PT Monday through Friday, send an email to service@oceanicusa.com, or write to: Pelagic Pressure Systems, 2002 Davis Street, San Leandro, CA 94577. Information is also posted on the Oceanic and AERIS Web sites (www.OceanicWorldwide.com and www.diveaeris.com).
Subject: Suunto Dive Computers Recalled Due to Decompression Hazard
Date: July 19, 2006; Release #06-216
Name of Product: Suunto D9 and D6 Model Wristop Dive Computers
Units: About 3,900
Manufacturer: Suunto Oy, of Finland
Hazard: These dive computers could incorrectly track dive time, which could cause incorrect calculation of decompression requirements. This could lead to decompression sickness.
Incidents/Injuries: None reported
Description: The D9 and D6 diving instruments are advanced, gas-switching, multi-mode, decompression dive wristop computers. The products included are: the D9 model with serial numbers 62102582 and below; and the D6 model with serial numbers 62103693 and below. The serial number is located on the side of the product. The model number is located on the back of the product.
Sold at: Diving specialty shops nationwide, as well as various Web sites, from September 2004 through June 2006 for about $1,275 for the D9 (without wireless transmitter) and $900 for the D6.
Manufactured In: Finland
Remedy: Consumers should only use these dive computers with backup instrumentation. Consumers should bring the recalled units to the nearest authorized Suunto dealer for a software update to correct the problem. A free battery replacement and pressure testing will be provided as part of the free software update service. All updated products will be marked with an indelible white dot on the back of the unit, or with an engraved "U" near the serial number.
Consumer Contact: For additional information and a list of authorized retailers, visit Suunto's Web site at www.suunto.com, call Suunto at (800) 543-9124 between 8 a.m. and 4 p.m. ET Monday through Thursday, and between 8 a.m. and 12 p.m. Friday, or email the firm at SuuntoD9-D6@nordictelecenter.fi
Subject: Scubapro(r) X650 Diving Regulators Recalled for Drowning Hazard
Date: June 7, 2006 Release #06-177
Name of Product: Scubapro(r) X650 Second Stage Regulator
Units: About 670
Manufacturer: Scubapro(r) with global headquarters located in El Cajon, Calif.
Hazard: A manufacturing error could cause the main housing of some regulators to change shape over time, which could cause the cover and diaphragm to become dislodged. If this occurs, air flow will be interrupted and the regulators will no longer function, posing a drowning hazard to users.
Incidents/Injuries: None reported.
Description and Models: The recall involves some X650 second stage regulators. All X650 second stage regulators are clearly marked with a blue capital "X" next to the numbers "650" in white. Affected regulators have a visible bump located on the right side of the unit between the letter "C" and where the mouthpiece attaches to the regulator body.
Sold at: Authorized Scubapro(r) dealers in the U.S. from June 2005 through May 2006 for between $400 and $670
Manufactured In: Genova, Italy
Remedy: Consumers should stop using the product immediately and contact Scubapro(r) to determine if they have an affected second stage regulator. If so, they will receive a free replacement regulator. The company is contacting registered owners of the product directly.
Consumer Contact: For more information, contact Scubapro(r) at (800) 808-3948 between 8 a.m. and 5 p.m. PT Monday through Friday or visit their Web site at www.scubapro.com
Firm's Media Contact: Cynthia Georgeson at (262) 631-6600
Subject: Oceanic Recalls Digital Dive Computer Due to Decompression Hazard
Date: June 22, 2006; Release #06-194
Name of Product: Versa Pro 2A Digital Dive Computer
Units: About 6,100
Manufacturer: Oceanic, of San Leandro, Calif.
Hazard: When using the dive computer set for "User Selected Digital Gauge Mode," the "Elapsed Dive Time" displayed can exceed the actual elapsed time under water. This can cause divers to ascend before fulfilling a decompression obligation, resulting in decompression sickness.
Incidents/Injuries: Oceanic has received one report of the dive computers malfunctioning. No injuries have been reported.
Description and Models: The recall involves Oceanic-brand Versa Pro 2A dive computers with serial numbers 12000 through 18176 which can be accessed and viewed on the computer's display. The serial number and "r2A" are printed on the side of the unit. This recall does not include any other Oceanic brand dive computer, or Versa Pro 2A while operated in normal decompression dive computer mode.
Sold at: Authorized Oceanic dealers sold Versa Pro 2A digital dive computers nationwide from March 2003 through April 2006 for between $430 and $640.
Manufactured In: United States
Remedy: Consumers should stop using the recalled digital dive computers and take them to any Authorized Oceanic Dealer to get a free replacement Versa Pro 2B.
Consumer Contact: For more information, contact Oceanic toll-free at (888) 854-4960 between 8 a.m. and 5 p.m. PT Monday through Friday. Consumers can also e-mail the firm at service@oceanicusa.com, or write to: Oceanic, 2002 Davis Street, San Leandro, Calif. 94577.
Subject: Scubapro® Recalls MK 20 Scuba Regulators for Service
Date: October 2, 2006; Alert #07-501
Name of Product: Scubapro® MK 20 First Stage Regulators
Units: About 48,500 units.
Manufacturer: Scubapro® USA, of El Cajon, Calif.
Hazard: Over-tightening of the Yoke or Din retainer during annual servicing of these regulators could result in a stress crack and failure of the regulator. If this occurs during a dive, air supply could be interrupted, posing a drowning hazard.
Incidents/Injuries: No injuries or underwater incidents have been reported. Scubapro® USA has received eight reports of units that failed after being serviced.
Description: The recall involves first stage regulators that are marked with the Scubapro brand and identified as the MK20.
Sold at: Authorized Scubapro® dealers nationwide from January 1996 through December 2001 for about $260.
Manufactured in: Italy and United States.
Remedy: Scubapro® USA has been providing a service upgrade kit via the authorized dealer network since May 2005 which contains a Yoke or Din retainer that prohibits over-tightening during annual service. Consumers can easily identify if the service upgrade has been completed by counting the vents on the plastic saddle located on the regulator. If the service upgrade has not been completed, the consumer should bring the regulator to any authorized Scubapro® dealer to have the service upgrade completed free of charge.
Consumer Contact: For assistance in locating the nearest authorized Scubapro® dealer or for more information, contact Scubapro® USA toll-free at (800) 731-6685 between 8 a.m. and 5 p.m. PT Monday through Friday, or go to the firm’s Web site at www.scubapro-uwatec.com
Subject: Aqua Scout Recalls Aqua Scout Water Scooters
Date: September 2, 2005; Alert #05-600
Product:Aqua Scout Water Scooters
Units: About 475
Importer:MyDigitalDiscount.com Inc. / Aqua Scout, of Minetto, N.Y.
Hazard:Hydrogen gas can build up in the battery compartment and cause the battery cover and the battery package to forcefully expel from the product, posing a risk of injury to the user or bystanders.
Incidents/Injuries:Aqua Scout has received five reports of the battery cover and/or the battery package being expelled from the water scooter, including two reports of minor injuries such as lacerations and bruising.
Description: The Aqua Scout Water Scooter is a hand-held, battery-powered product used to propel swimmers through the water. The product has a yellow or red plastic enclosure, a black plastic handle and propeller. There is no model numbers or brand name written on the scooter.
Sold at:Online at the Aqua Scout Web site and through eBay from May 2005 through July 2005 for about $120.
Manufactured in:China
Remedy: Consumers should stop using the recalled water scooter immediately and return it to Aqua Scout for a free replacement.
Consumer Contact:Consumers have been contacted directly by Aqua Scout. For additional information, contact Aqua Scout via e-mail at matchoo5050@yahoo.com, by telephone at (315) 343-0369 between 9 a.m. and 4 p.m. ET Monday through Friday, or visit the Aqua Scout Web site at www.aquascout.us
Subject: Cressi-Sub Recall of SCUBA Buoyancy Compensators
Date: February 23, 2005 ; Release # 05-121
Name of product: Cressi-sub Buoyancy Compensators
Units: About 1,000
Distributor: Cressi-sub USA, of Westwood, N.J.
Manufacturer: Cressi-sub S.p.A., of Genoa, Italy.
Hazard: A slow leak from the shoulder exhaust caused by expansion of an internal cable housing could result in slow deflation. This could impact the diver’s ability to control buoyancy.
Incidents/Injuries: None reported.
Description: Buoyancy Compensator devices provide buoyancy control for scuba divers by allowing them to inflate or deflate the devices. The recalled buoyancy compensators have model numbers J107, J113, J115, and J119. The numbers appear on the top right-hand corner of the unit (on the shoulder). “CRESSI” is written on the buoyancy control devices.
Sold at: Authorized dive shops nationwide and at various Web sites from January 2003 through September 2004 for between $400 and $700.
Manufactured in: Genoa, Italy.
Remedy: Customers can return the product to a Cressi-sub-authorized dive shop to have the product retro-fitted with a free replacement internal cable housing. Buoyancy Compensator devices with a black retaining ring around the yellow inflate button on the inflation mechanism, and an adjoining gray cover assembly (bypass case), which screws onto the inflator, are subject to this recall and must be retro-fitted. Devices which have yellow retaining rings and black cover assemblies have been retro-fitted.
Consumer Contact: For more information or for a list of authorized dive shops, consumers can call Cressi-sub at (800) 338-9143 between 9 a.m. and 4:30 p.m. ET Monday through Friday, or visit the firm’s Web site at www.cressisubusa.com.
Subject: Head USA Inc. Recalls SCUBA Diving Computers
Date: February 22, 2005; Release # 05-118
Name of product: SCUBA Diving Computers
Units: 181
Distributor: Head USA Inc., of Norwalk, Conn.
Hazard: The dive computers were improperly calibrated, resulting in incorrect calculations. Diving with an improperly calibrated dive computer can provide inaccurate “No Decompression (no stop) Time,” “Decompression Time,” “Desaturation Time” and “No Fly Time.” This could result in divers suffering serious injuries, including decompression sickness.
Incidents/Injuries: Head USA received one report of a computer malfunction. No injuries were reported.
Description: The recall includes the Dacor Darwin Air dive computer with serial number 3265 through 3415, and the Dacor Darwin Console dive computer with serial numbers 8503 through 8592. The serial number will appear on the dive computer screen after removing and reinserting the batteries. The Darwin Air is a completely integrated dive computer and pressure gauge with “Dacor Darwin Air” written on the front. It is encased in gray on black heavy-duty plastic. The Darwin Console is a dive computer with a compact submersible pressure gauge bearing the word “Dacor” on the front. It is encased in black heavy-duty plastic.
Sold at: Dive shops nationwide from March 2004 through December 2004 for about $700 for the Darwin Air and $400 for the Darwin Console.
Manufactured in: Italy by HTM Sports S.p.A.
Remedy: Consumers should immediately stop using these recalled diving computers, and return the computers to an authorized Dacor dealer for a free repair.
Consumer Contact: Call Head USA at (800) 874-3236 between 9 a.m. and 5 p.m. ET Monday through Friday, or visit the firm’s Web site at www.divedacor.com
Firm's Media Contact: Karin Flood at (203) 855-8666, Ext. 1212.
Subject: SCUBAPRO Recall of Converter Kit
Date: December 9, 2004; Alert #05-523
Name of Product: Converter for Air 2 Alternate Inflation Regulator
Units: 3,300
Manufacturer: SCUBAPRO of El Cajon, CA
Hazard: An insufficient bond may cause a break in the converter coupling which could impact the diver’s ability to control buoyancy.
Incidents/Injuries: One incident with no reports of injuries.
Description: This alert is only for consumers who dive with an Air 2 Alternate Inflation Regulator on a NON-SCUBAPRO buoyancy compensator. Divers who use the Air 2 on a SCUBAPRO buoyancy compensator are not affected by this alert.
Sold by: Authorized SCUBAPRO dealers nationwide from October 8, 2003 through August 30, 2004 for approximately $7.75 or included in the Air 2 package beginning December 19, 2003 through August 30, 2004.
Manufactured in: Taiwan
Remedy: Consumers who dive with an Air 2 Alternate Inflation Regulator on a NON-SCUBAPRO buoyancy compensator should immediately stop use and contact SCUBAPRO. They will be instructed to take their buoyancy compensator with the Air 2 intact to their authorized SCUBAPRO dealers for a free replacement.
Consumer Contact: (800) 382-2211, Monday through Friday, between 7:00 AM and 5:00 PM PST or go to www.scubapro.com
Subject: Ocean Management Systems Recall of SCUBA Manifolds
Date: November 17, 2004; Alert #05-511
Name of Product: Rotating Cross Bar SCUBA Manifold
Units: About 140
Importer: Ocean Management Systems, Inc., of Middletown, NY.
Hazard: Undersized o-rings installed on the cross bar can cause a loss of breathing air from the SCUBA cylinder, presenting a risk of drowning.
Incidents/Injuries: There has been one report of breathing air leaking from a cylinder. No injuries have been reported.
Description: The recall involves the 200 and 300 Bar versions of the OMS Rotating Cross Bar Manifold. The manifold consists of two valves which have “O.M.S.” stamped on the side of each valve and a crossbar that has three O-rings per side. Each part has a black plastic knob.
Sold at: Dive stores nationwide from December 2003 through September 2004 for about $238.
Manufactured in: Italy
Remedy: Affected units will be replaced at no cost to the consumer.
Consumer Contact: Affected consumers are being contacted directly by OMS to arrange for a free replacement. Consumers with affected products who have not been contacted should call OMS at 845-692-3600 between 9 a.m. and 5 p.m. ET Monday through Friday or send an e-mail to kim@omsdive.com
Subject: Pelagic Pressure Systems Recall of SCUBA BC Inflators
Date: September 2, 2004 ; Release # 04-210
Name of product: Oceanic-brand Reliant Buoyancy Compensator (BC) Inflators and AERIS-brand AW3 BC Inflators
Units: About 11,600
Manufacturer: Pelagic Pressure Systems, of San Leandro, Calif.
Hazard: The Power Inflator Buttons can stick, which can cause uncontrolled inflation of the BC. This could cause divers to ascend too fast, resulting in decompression sickness as well as the danger of an embolism.
Incidents/Injuries: Pelagic has received eight reports of the buttons sticking. No injuries have been reported.
Description: The recall includes Oceanic-brand Reliant BC inflators and AERIS-brand AW3 BC inflators. The Oceanic Reliant-type inflators have three flow-through holes in the hand grip of the lower inflator mechanism. The AERIS AW3 inflator has one flow-through hole in the hand grip of the lower inflator mechanism.
Manufactured in: Taiwan.
Sold at: Authorized Oceanic dealers sold BCs fitted with Reliant inflators nationwide from February 2004 through June 2004 for between $320 and $550. Authorized AERIS dealers sold BCs fitted with AW3 inflators from May 2004 through June 2004 for between $400 and $560.
Remedy: Consumers should stop using BCs fitted with the recalled inflators immediately and take them to any authorized Oceanic or AERIS dealer to get a free repair.
Consumer Contact: Call Pelagic toll-free at (888) 854-4960 between 8 a.m. and 5 p.m. PT Monday through Friday, send an email to service@oceanicusa.com or info2@diveaeris.com, or write to Pelagic Pressure Systems, 2002 Davis Street, San Leandro, CA 94577.
Subject: Halcyon Manufacturing Recall of SCUBA BC Inflators
Date: September 2, 2004; Release # 04-209
Name of product: Halcyon SCUBA Buoyancy Compensator (BC) Inflators
Units: About 4,000
Manufacturer: Halcyon Manufacturing, of High Springs, Fla.
Hazard: The SCUBA BC bladder can have a slow leak because of imperfections within the machining of the stainless air barrel of their inflators. This can cause unexpected buoyancy problems with divers, possibly resulting in decompression sickness.
Incidents/Injuries: Halcyon has reports of 10 incidents of BCs leaking. No injuries or deaths have been reported.
Description: Halcyon is recalling all stainless steel power inflators. They have a stainless steel oral and power inflate button. Inflators made of plastic are not included in this recall. The repaired inflators have a groove at the base of their retainer nut. The BCs sold with these inflators are black and the Halcyon logo is on the front and collar of the BCs.
Sold at: Dive stores nationwide sold these inflators individually from October 2003 through May 2004 for about $46. The inflators also were sold as part of BC units ranging from $270 to $600.
Manufactured in: United States.
Remedy: Consumers should stop using these BCs immediately and contact Halcyon for information on receiving a free repair.
Consumer Contact: For more information, contact Halcyon Manufacturing at (800) 425-2966 between 8 a.m. and 5 p.m. ET Monday through Friday or visit their Web site at www.halcyon.net
Subject: UWATEC Recall of Smart Dive Computers
Date: July 17, 2003; Release # 03-163
Name of product: UWATEC Smart Dive Computers
Units: 6000 units
Manufacturer: UWATEC AG of Hallwil, Switzerland
Hazard: The computer's alert signal system may not work properly and the computer screen may freeze. This may cause inaccurate information to be displayed, such as water depth, tank pressure, and ascent rate, posing a risk to the safety of a diver.
Incidents/Injuries: The firm has received two reports of the dive computers not working properly, though no injuries have been reported.
Description: The recalled units are the UWATEC Smart PRO and the Smart COM dive computers. The Smart PRO is offered as a console and as a wrist unit. The Smart COM only comes in a console model. The names of each unit appear on the computer case, along with the name "UWATEC."
Sold at: Authorized UWATEC dealers nationwide from February 2002 through June 2003 for between $638 and $910.
Manufactured in: Switzerland
Remedy: Consumers should contact UWATEC for a free replacement unit.
Consumer Contact: Consumers can call UWATEC American representatives at (800) 808-3948 24 hours a day, 7 days a week or register on the website at www.uwatec.com.
Media Contact: Cynthia Georgeson at (262) 631-6653
Subject: UWATEC AG Recall of 1995 Aladin Air X NitrOx Dive Computers
Date: February 5, 2003; Release # 03-079
Name of Product: Aladin Air X NitrO Dive Computers
Units: About 390
Hazard: Software in the dive computers may inaccurately calculate desaturation times, resulting in possible decompression sickness under aggressive dive conditions.
Incidents/Injuries: UWATEC AG has received five reports of decompression sickness allegedly associated with the use of the 1995 dive computers.
Description: This recall involves Aladin Air X NitrOx dive computers manufactured in 1995. The manufacture date is located on the back of the dive computer, in the lower right hand corner. The date code reads the number of the month followed by a decimal point and the year, for example, "01.95." The dive computers are blue and black with the words "Aladin" and "NitrOx" printed across the front. Aladin Air X NitrOx dive computers with date codes other than "95" are not included in this recall.
Sold At: Scuba diving stores sold the dive computers nationwide from July 1995 through March 1996 for between $950 and $1,200.
Remedy: Consumers should stop using these dive computers immediately and contact UWATEC for a free replacement. Consumers will receive the current model, Aladin Air Z NitrOx.
Consumer Contact: For more information, consumers can contact UWATEC toll-free at (800) 806-0640 anytime or visit the firm's web site at www.uwatec.com (note - recall no longer available on firm's web site).
Subject: Oceanic USA Recalls Scuba Regulators
Date: December 3, 2002; Release # 03-047
Name of Product: Oceanic CDX first stage regulators
Units: about 24,700
Hazard: Extreme vibration can occur within these CDX regulators, which can cause an air leakage underwater. Divers could run out of air and drown.Incidents/Injuries: Oceanic has received six reports of noise or vibration accompanied by air leakage. No injuries have been reported.
Description: Oceanic CDX first stage regulators subject to the recall have serial numbers 9200001 to 9205622, 9800013 to 9801711, 0200001 to 0213294, 0D0001 to 0D3046, or 9D0001 to 9D3273. The serial number is stamped into the side of the body of the regulator. The regulators have the name "OCEANIC" written on the rubber boot of the first stage. These CDX regulators were sold with the following second stage regulators: Alpha 7, Delta 3, Gamma 2, and Zeta.
Sold At: Authorized Oceanic dealers sold these regulator sets worldwide from May 1999 through October 2002 for between $330 to $640, depending on the second stage.
Remedy: Consumers should stop using the recalled CDX regulators immediately and take them to any authorized Oceanic dealer to get a free repair. Other repairs or normal maintenance performed in addition to the recall repair will incur a charge. Consumer Contact: For more information, contact Oceanic toll-free at (866) 723-2642 between 8 a.m. and 5 p.m. PT Monday through Friday, by visiting the firm's web site at www.OceanicWorldWide.com, by writing an email to service@oceanicusa.com, or by writing to Oceanic USA, 2002 Davis Street, San Leandro, CA 94577.
Subject: Johnson Outdoors Recalls SCUBAPRO/UWATEC™ Dive Computers
Date: July 18, 2002; Release # 02-205
Name of Product: SCUBAPRO/UWATEC™ dive computer consoles
Units: about 1,700
Hazard: The U-Line™ submersible pressure gauge that is part of the dive consoles can malfunction and display inaccurate pressure readings. Divers using the consoles could fail to decompress properly during a dive, causing decompression sickness.
Incidents/Injuries: CPSC and Johnson Outdoors Inc. have received four reports of the pressure gauge malfunctioning. No injuries have been reported.
Description: Only U-Line™ submersible pressure gauges contained in UWATEC™ brand Smart PRO™, Pro ULTRA™, and Sport PLUS™ dive computer consoles are included in the recall. The consoles are mostly gray in color and the brand name "UWATEC™" is written on the front of each console. The pressure gauges are made in the U.S. and the computers are made in Switzerland. All of the recalled consoles have a test code that appears on the back of the gauge as follows:
Test Codes:
Tested - IL Tested - LL Tested - DM Tested - JL Tested - AM Tested - EM Tested - KL Tested - BM Tested - LL Tested - CM
Sold At: Aquatic sports, sporting goods and dive shops nationwide sold these gauges from January 2002 through May 2002 for between $500 and $700.
Remedy: Consumers should stop using the recalled consoles immediately and contact SCUBAPRO/UWATEC at (800) 382-2211 between 8 a.m. and 4:30 p.m. PT Monday through Friday. Consumers should send the console to SCUBAPRO/UWATEC, Attention: Tech Services/U-Line PG 1166 Fesler Street, El Cajon, CA 92020, to receive a replacement pressure gauge.
No other SCUBAPRO/UWATEC products are included in the recall.
Subject: Sherwood SCUBA LLC Recalls Maximus Regulators
Date: April 30, 2002; Release # 02-150
Name of Product: Maximus SCUBA regulators
Units: about 14,000
Hazard: The second stage orifices on these regulators can be cracked, bent or broken. This can result in a loss of breathing air underwater.
Incidents/Injuries: Description: Sherwood SCUBA has received seven reports of broken second stage orifices on these regulators. Two of the regulators broke during dives underwater. No injuries were reported.
Description: The Maximus regulators included in this recall have the following model, serial numbers and connection types: Model Number Serial Number Range Description SRB5600 K600001 through K611834 Yoke Connection SRB5600D2 DK60000 through DK62000 Din-Style Connection SRB5600CE EK60001 through EK62000 Yoke Connection
The serial numbers are laser marked on the top of the second stage case next to the mouthpiece.
Sold At: Authorized Sherwood SCUBA distributors and dealers nationwide sold these regulators from January 1998 through November 2000 for about $580
Remedy: Consumers should stop using the recalled regulators immediately, and contact their nearest authorized Sherwood retailer for a free repair
Consumer Contact: For more information, call Sherwood SCUBA at (800) 469-9929 between 8 a.m. and 5 p.m. PT Monday through Friday, or go to the firm's web site at www.sherwoodscuba.com.
Subject: Diving Unlimited International Inc. Recalls Buoyancy Control Systems
Date: December 19, 2001; Release # 02-072
Name of Product: Overpressure Valves (OPV) used with Buoyancy Control Systems
Units: about 3,500
Hazard: The overpressure valve can stick in the open position, posing a drowning hazard to divers.
Incidents/Injuries: DUI has received two reports of the valves sticking open. No injuries have been reported.
Description: These Buoyancy Control Systems come in two versions, a jacket style and a wings style. The overpressure valve is installed on these units. It is very difficult to distinguish the defective overpressure valves from those not affected. Therefore, all overpressure valves with red pulls are included in this recall. The jacket model has the DUI logo printed on the jacket pocket, epaulette, and weight pockets. The wings model has the DUI logo printed on the epaulette and weight pockets. The letters "DUI" are printed on the permanent hang tags found on the Buoyancy Control System. All new OPVs are equipped with yellow pulls.
Sold At: Authorized DUI dealers nationwide sold these Buoyancy Control Systems from November 1997 through November 2001 for about $590.
Remedy: Consumers should stop using the overpressure valves immediately and contact the DUI dealer where purchased for a free replacement.Consumer Contact: For more information, consumers can contact DUI at (800) 325-8439 between 8 a.m. and 5 p.m. PT Monday through Friday. Consumers also can visit the firm's web site at www.DUI-Online.com
Subject: Sheico PKS Inc. Recalls Buoyancy Compensator Devices (BCDs)
Date: May 3, 2001; Release # 01-141
Name of Product: buoyancy compensator devices (BCDs)
Units: about 10,000
Hazard: The overpressure valve can stick in the open position, presenting a drowning hazard to divers.
Incidents/Injuries: Sheico has received one report of a valve sticking open. No injuries have been reported.
Description: The recalled buoyancy compensators were sold under the following brand and model names:
- Sherwood: Silhouette, Magnum, Avid, Luna, Outback and Freedom, serial numbers between 21280001 and 22010740
- Genesis: Cayman, Cobra, Athena, and Phantom, serial numbers between 21280001 and 22010740
- Genesis: Talon and ReCon, serial numbers between 20520001 and 22010740
- Aeris: Atmos, all units
The brand name can be found on the right, outside pocket of the jacket; the model name can be found inside the jacket, near the small of the back; and the serial number can be found on the aircell of the buoyancy compensator.
Sold At: Dive stores and mail-order catalogues nationwide sold the BCDs from September 2000 through March 2001 for between $150 and $450.
Remedy: Consumers should stop using the BCDs immediately and return them to the dive store where purchased for a free replacement.
Consumer Contact: For more information, call Sheico toll-free at (800) 808-3306 between 9 a.m. and 5 p.m. ET Monday through Friday. Consumers can also visit one of the following websites: www.sherwoodscuba.com/opv, www.genesisscuba.com/opv, or www.diveaeris.com.
Subject: Atomic Aquatics Recalls Scuba Regulators
Date: April 18, 2001; Release # 01-126
Name of Product: Scuba Regulators
Units: about 3,000
Hazard: The regulator's first stage spring can break causing restricted airflow, posing a drowning hazard to consumers.
Incidents/Injuries: Atomic Aquatics has received 14 reports of regulator springs breaking, four of which occurred while the scuba equipment was in use. No injuries have been reported.
Description: The recalled regulators have a black body with either a gray, blue, red or yellow faceplate. Printed on the faceplate of the regulator are the words, "Atomic Aquatics"; the model name, "Titanium"; and the model number, T1, T1x, B1 or Z1.
The regulators were manufactured between May 1999 and October 1999, and have serial numbers that range from A07751 to A11276. The serial numbers can be found on a label beneath the rubber mouthpiece.
Sold At: Specialty dive equipment stores nationwide sold the regulators from May 1999 through February 2000 for between $450 and $1,600.
Remedy: Consumers should stop using these regulators immediately and return them to Atomic Aquatics or an authorized Atomic Aquatics dealer for repair.
Consumer Contact: For more information, call Atomic Aquatics toll-free at (888) 270-8595 anytime.
Subject: Durapro Systems Recalls Buoyancy Compensator Devices (BCDs)
Date: June 16, 1998; Release # 98-127
Name of Product: scuba buoyancy compensator devices (BCDs)
Units: about 1,955
Hazard: Under normal scuba diving conditions, the hoses on these BCDs can separate from the jacket, and possibly cause drowning.
Incidents/Injuries: Durapro systems is aware of three reports of these low-pressure inflator hoses separating from these BCDs. No injuries have been reported.
Description: These recalled Durapro Systems BCDs are the Cirrus, Stratus, Aruba, Slimline and Resort. The low-pressure hoses on the BCDs, part number 302, connects the first stage regulator to the BCD power inflator valve. These hoses are identified with the following markings: "PLIOVIC MULTI PURPOSE 1/4" 1/D (6.4 mm) 250 PSI WP (1.7 MPA)...MADE IN USA...GOODYEAR."
Sold At: Retail dive stores and a mail-order catalogue sold these BCDs from January 1996 through May 1998 for about $179 to $359.
Remedy: Consumers who purchased one of thesea Durapro Systems BCDs should stop using it immediately. The hose from the BCD should be returned to the dive store where purchased for a free replacement hose.
Consumer Contact: For additional information, consumers should call Durapro Systems toll free at (800) 345-6634 between 9 a.m. and 5 p.m. EDT Monday through Friday.
Subject: Mares America Corp. Recalls Guardian Dive Computers
Date: October 15, 1997; Release # 98-012
Name of Product: dive computers
Units: about 1,200
Hazard: Guardian dive computers can fail to function when water leaks into the battery compartment during a dive. Also, the computer can malfunction by not automatically switching on during a dive or the computer control buttons on the computer can fail to operate properly. These failures could result in divers suffering decompression sickness, which can lead to significant injury.
Incidents/Injuries: Mares is aware of 45 incidents of the Guardian dive computer failing to operate properly. There have been no injuries or deaths reported involving the use of these dive computers.
Description: The Guardian dive computer comes in two models, a wrist mount and a hose mount. The computer is about 3 inches wide and 3 inches long. It is black and gray with yellow buttons. "Mares" and "Guardian" are written on the frame of the computer around the screen.
Sold At: Selected Mares dive shops sold the Guardian computers nationwide from January through August 1997 for about $400.
Remedy: Divers should stop using the Guardian dive computer immediately and return it to their Mares authorized dealer to receive a free replacement computer.Consumer Contact: For more information, contact Mares America Corp. toll free at (800) 874-3236 between 9 a.m. and 5 p.m. Monday through Friday, or call any other time and leave a message.
Subject: Kmart Recalls Healthways Dive Masks
Date: September 15, 1997; Release # 97-188
Product Name: Healthways Ocean Side dive masks
Units: about 74,000
Hazard: The glass in the masks can break into sharp pieces and cut divers. Incidents/Injuries: Kmart has received seven reports of masks' glass breaking, resulting in one diver's hand being cut.
Description: The Healthways Ocean Side dive mask is made of fluorescent yellow, marine blue or raspberry plastic and clear tempered glass. The mask was part of a dive set that included a snorkel and fins. The words "Healthways Ocean Side...Tempered" are printed on the front of the mask. The dive set is packaged in a blue, yellow and white cardboard box labeled in part, "Barbados Healthways Ocean Side...4-Piece Dive Set...Made in China for Kmart." The dive set is visible through a plastic window on the front of the box. The following UPC codes are on the box: 609299960042, 74767136154, 609299960011, 747671361510, 609299960028, 747671361527, 609299960035 or 747671361534.
Sold At: Kmart and Super Kmart stores nationwide sold the dive mask set from February 1997 through August 1997 for about $20.
Remedy: Consumers should stop using these dive masks immediately and return them to the nearest Kmart store for a refund. Consumers will receive $8 for the dive mask or a full refund for the set.
Consumer Contact: For more information, consumers should call Kmart at (800) 63KMART anytime or access Kmart's web site atwww.kmart.com.
Subject: Scubapro Recalls G500 Second Stage Regulators
Date: JULY 2, 1997; Release # 97-151
Product Name: G500 second stage regulators
Units: about 1,800
Hazard: The VIVA control knobs on these regulators can detach during a dive allowing water to rush into the regulator, which could result in a diver drowning.
Incidents/Injuries: Scubapro has received six reports of the VIVA control knob detaching from the regulator, two of which occurred during a dive. No injuries have been reported.
Description: The G500 second stage regulators involved in this recall have serial numbers less than or equal to 13497450. The serial number is located on the bottom face of the exhaust manifold.
Sold At: These products were sold in diving specialty stores nationwide from March 1997 through June 1997 for around $300.
Remedy: Consumers should immediately stop using G500 second stage regulators involved in this recall and contact their local, authorized Scubapro dealer to arrange for a free replacement of the VIVA control knob. Under no circumstances should consumers dive with these regulators until they have been repaired.
Consumer Contact: All other questions should be directed to Scubapro at (800) 467-2822.
Hazard: If the battery pack floods during the dive, the battery could overheat later while above water and catch fire.
Incidents/Injuries: LMI has received two reports of Source-12 Battery Packs catching on fire several hours after use. No injuries have been reported.
Description: The battery packs, measuring 7 inches long by 4 inches wide, are black with a clear top. This corrective action involves Source-12 Battery Packs with the following model numbers:
800-0008 850-0001 through 850-0011 850-0013 and 850-0014 860-0001 through 860-0006 860-0008 860-0018 through 860-0031
Sold At: Dive shops sold the Source-12 Battery Packs nationwide beginning in January 1990 for about $275. LMI also sold the packs directly to consumers.
Remedy: If consumers notice the battery has flooded during a dive, they should disassemble the battery's retaining ring and bulkhead to prevent a possible fire. Consumers should stop using the Source-12 Battery Packs immediately and call LMI for free repair or upgrade information. Consumers can also return the batteries to the dive shop where purchased and the batteries will be sent to LMI.
Consumer Contact: Consumers can reach LMI collect at (831) 645-1525 or sales@lmindustries.com for more information.
Subject: Trident Diving Equipment Recalls Scuba Diving Tank Valve Caps
Product Name: Screw-in type DIN Tank Valve Caps
Units: approximately 500
Hazard: If tank pressure is 3000 psi or greater, the valve cap is not properly inserted, and the air valve is on, the valve caps may fracture and pop out of the air tank, causing injury.
Incidents/Injuries: Trident is aware of one incident of injury where a valve cap allegedly popped off a tank and struck the consumer in the hand.
Description: The valve cap, Trident Model RP73, is intended for use on SCUBA diving compressed air tanks to prevent sand, dirt or dust from contaminating the area around the valve. The black plastic caps measure 1" in diameter and 1" thick. The hexagon-shaped caps can be tethered to tanks by a string attached to a plastic eyelet in the top of the cap.
Sold At: The valve caps were sold between January and June 1995 through Trident's catalog and at dive shops nationwide. The caps cost between $2.00 and $4.00 and were packaged in unlabeled plastic bags.
Consumer Contact: Consumers who own model RP73 caps should call Trident at (800) 234-3483 for a free replacement cap.
Subject: DUI Recalls Dry Suit AC Valve
Date: June 20, 1988; Release # 88-042
Product Name: DUI AC valve
Units: unknown
Hazard: The valve may free-flow causing air to fill the dry suit resulting in the diver rising rapidly to the surface or failing to provide sufficient air to maintain buoyancy. The possibility exists of serious injury and/or death, especially if appropriate emergency procedures are not followed.
Incidents’Injuries: The Consumer Product Safety Commission is aware of incidents involving 16 divers which are associated with AC valve malfunction.
Description: The DUI AC valve is used on SCUBA diving dry suits. The DUI AC valve deflates or inflates the diving dry suit to allow the diver to equalize air pressure while ascending or descending in the water by pressing on the valve. The AC valve differs from the standard 2-valve system commonly used in dry suits, where air intake and outflow are controlled by two separate valves.
Remedy: Owners of dry suits with AC valves attached should immediately stop using the dry suits. DUI asks that all divers return their suits (at DUI's expense) and have the AC valve replaced at no charge. Divers who have one of these AC valves attached to their dry suits should contact DUI on their toll free number 800-327- 8439 to obtain valve replacement instructions and a FREE dry suit check-up. All dry suits returned to DUI will be tested and DUI will fix any leaks in the suit (except for seals) at no additional charge. Further, if the diver wishes to upgrade the valve system, this will be done at the manufacturer's cost of the valves only.
Consumer Contact: If owners of these suits have any questions regarding the recall or identifying the dry suit valves in question, please contact the firm at the number listed above or the CPSC toll-free hotline number at 800-638-CPSC. A teletypewriter number for the hearing impaired is 800-638-8270.
The U.S. Consumer Product Safety Commission (CPSC) has issued
recall notices for the following scuba equipment. Please check your
gear bag to make certain you aren’t using any recalled equipment.
Contact the manufacturer for further information.
